12V Battery Tester – CCA / Cranking / Charging (Draper 81164)
Quickly pinpoint battery, starter and alternator problems in minutes. The Draper 81164 reads real CCA (100–2000), cranking voltage/time and charging-system ripple—ideal for on-vehicle checks on Defenders, Discoverys and daily drivers alike. No batteries required; powers from the car battery.
Key Features
- Measures true CCA & battery health (100–2000 CCA).
- Starter cranking voltage/time recording.
- Alternator charging & ripple test.
- Supports CCA / BCI / CA / MCA / JIS / DIN / IEC / EN / SAE / GB.
- LED traffic-light results at a glance.
- No batteries to replace – powers from the car.
- −20 °C to +50 °C operating range.
£77.58 Original price was: £77.58.£67.49Current price is: £67.49. inc. UK VAT
Normal Stock ItemRegular stock line. Stock may be running low or awaiting replenishment, but is normally available to us quickly.
Genuine, OEM & trusted aftermarket parts for vehicles we know and support.
Free mainland UK shipping £99+ · Upgraded delivery options at checkout
Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.
Why you need it
Intermittent non-starts, dim lights, random warning chimes? This handheld tester removes the guesswork by measuring:
- Battery health & true CCA (100–2000 CCA and multiple standards) to tell you if the battery is good, needs charging or is due for replacement.
- Starter (cranking) test reporting live cranking voltage and cranking time.
- Charging test with ripple analysis so you can spot alternator/diode issues fast.
Perfect for the Land Rover toolkit and general workshop use—especially on vehicles that do lots of short trips or carry winches, fridges and auxiliary loads. Small enough to tuck away in the vehicle under a seat, in a cubby box or even a door pocket.
What it does at a glance
- Battery test with quick LED status (Green = Good, Yellow = Charge, Red = Bad).
- Selects industry standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB. Ranges typically 100–2000 (DIN/IEC/GB to 1400).
- Cranking test: records cranking voltage and time automatically when you start the engine.
- Charging test: guides you through idle/loaded checks and ripple test.
- No internal batteries – powers from the vehicle battery (note: below ~7.0 V you’ll be prompted).
Key specifications
- Stock No./Part No.: 81164 / BDT/M.
- Measurement ranges (selected standard): CCA/BCI/CA/MCA/EN/SAE 100–2000; DIN/IEC/GB 100–1400; JIS 26A17–245H52.
- Operating temperature: −20 °C to +50 °C.
- Power: via battery clamps (no separate batteries).
- Status LEDs: Good / Charge / Bad.
What’s in the box
- 12 V Battery Diagnostic Tool with LCD and integrated keypad
- Positive/negative test leads with clamps
- Quick-start prompts on screen; full manual available from Draper (PDF)
Quick start (2-minute test)
- Ignition OFF, connect red clamp to + and black to −. Tester powers up.
- Choose Battery Test → pick the standard stamped on your battery and enter the rated value (e.g., EN 850).
- View result + LED.
- For Cranking Test: select it and start engine when prompted; read cranking voltage/time.
- For Charging Test: follow prompts; the tool performs ripple checks under load.
Safety: Keep clear of moving parts, wear eye protection, and never allow clamps to touch. See manual for full cautions.
| Weight | 0.3 kg |
|---|---|
| Dimensions | 20 × 10 × 10 cm |
Brand
Draper Tools Stockist
Only logged in customers who have purchased this product may leave a review.
Our trusted couriers will get your orders to you as quickly and reliably as possible.
Standard UK delivery is next working day. For all orders outside the UK DHL Express provide shipping. You can also collect your order from us!
Free mainland UK postage and packaging on all eligible orders over £99 (terms and conditions apply).
- Return within 14 days of delivery of your order.
- Items must be unused, unopened and in original packaging.
- Faulty items: we’ll cover return postage—keep your receipt.
- Refunds & Replacements are dealt with once the original item is received and inspected.
Returns – quick FAQs
How long do I have to return an item?
Who pays return postage?
What items are non-returnable?
How do I start a return?
Please include your order number and a brief reason for the return.
All parts sold by Twinwoods 4x4 are covered by a minimum 12 month warranty against manufacturing defects.
Some products and brands may carry a longer warranty period where this is provided by the manufacturer. Where applicable, this will normally be stated on the individual product page.
The warranty covers manufacturing defects only and does not cover failure caused by incorrect fitting, misuse, accidental damage, normal wear and tear, or faults elsewhere on the vehicle.
Warranty claims may require the part to be returned for inspection and testing before any repair, replacement or refund is authorised.
This does not affect your statutory rights.
For full details, please see our Terms and Conditions.



Reviews
There are no reviews yet