Defender Interior Parts
Shop Defender interior parts for cabin trim repairs, loose fittings, dash panel work, door card repairs, floor plate fixing and front electric window regulator replacement.
This section includes Defender trim clips, dash screws, cowl screws, door trim rivets, fir tree fasteners, trim washers, gear lever gaiters, door card fitting parts and front electric window regulators with motors. Check each product page for part number, quantity, handed side and any shared Defender, Series, Discovery or Range Rover Classic fitment before ordering.
Showing all 17 resultsSorted by popularity
Find the right Defender interior part route
Defender interior work often comes down to the small clips, screws, rivets and washers that hold the cabin trim together. Use the route below to narrow the job, then confirm the exact part number, pack quantity and fitment notes on the product page.
| Job / route | Best place to start | Check before ordering |
|---|---|---|
| Dash panel and dash trim repairs | Dash panel screws, dash end panel screws, dash cowl screws and dashboard trim washers | Check screw size, pack quantity and original part number before ordering. |
| Door card and door trim work | Door trim clips, Snapsac clips, door trim rivets, trim fasteners and door card fitting kits | Match the clip, rivet or fastener to the door card or trim panel being refitted. |
| Floor plate and cabin panel fixing | Footwell floor plate fixing kits, self-tapping screws, captive Loknuts and small panel fixings | Check whether the part is Defender-only or shared with Series models where that fitment is stated. |
| Gear lever trim | R380 and LT77 gear lever gaiters | Check gearbox fitment before ordering lever gaiters and transmission tunnel trim parts. |
| Electric window repairs | Front electric window regulators with motors | Check left-hand or right-hand front fitment before ordering a window regulator. |
| Electrical and body overlap | Defender electrical parts and Defender exterior and body parts | Use the electrical or exterior route where the interior repair overlaps with switches, window motors, lamps, locks or body trim. |
Check Defender interior fitment before ordering
Small Defender interior fixings can look similar, but clip shape, screw size, pack quantity and original part number matter. Some fasteners are used across more than one Land Rover model, while handed parts such as front window regulators must be matched to the correct side. The product title, part number and fitment notes should be used together before adding parts to the basket.
Part number
Compare the stated reference with the clip, screw, rivet, washer, gaiter or regulator being replaced.
Compare the stated reference with the clip, screw, rivet, washer, gaiter or regulator being replaced.
Pack quantity
Check whether the part is supplied singly, as a 5 pack, 10 pack or as a fitting kit.
Check whether the part is supplied singly, as a 5 pack, 10 pack or as a fitting kit.
Position and panel
Match the fixing to the dash, door card, trim panel, footwell plate or transmission tunnel area being repaired.
Match the fixing to the dash, door card, trim panel, footwell plate or transmission tunnel area being repaired.
Handed parts
Check left-hand or right-hand front fitment before ordering electric window regulators.
Check left-hand or right-hand front fitment before ordering electric window regulators.
Genuine, OEM and aftermarket Defender interior parts
Individual product pages identify the brand or quality level where that information is available. Use the stated brand, part number, pack quantity, fitment note and included parts to compare Defender interior trim and fixing parts before ordering.
| Part type | How it is shown on Twinwoods 4x4 |
|---|---|
| Genuine Land Rover | Genuine parts are identified as Genuine Land Rover where that status is stated on the product page. |
| OEM or OE-supplier | OEM and OE-supplier parts are identified where the supplier or product data supports that claim. |
| Aftermarket replacement | Aftermarket parts cover selected trim clips, screws, fasteners, gaiters, regulators and cabin repair parts where Genuine or OEM supply is not required or not stated. |
Useful Defender interior routes
| Route | Use it for |
|---|---|
| Seat covers | Seat protection and cabin trim refresh work outside the main Defender interior fixing category. |
| Defender electrical parts | Switches, window motors, lamps, relays and electrical parts that overlap with cabin repairs. |
| Defender exterior and body parts | Body trim, door, vent, wing and panel fixing routes where interior and exterior trim work overlap. |
| Defender security parts | Locks, locksets, security hardware and cabin-related security parts. |
| Discovery 1 interior parts | Discovery 1 interior parts where shared fixings or cabin repair routes are relevant. |
