Service Tools
Land Rover service tools for routine maintenance and more involved repair work, including TD5 timing and injector tools, oil filter spanners, grease guns, drain pans, fluid pumps, pullers and separator tools.
Start with the job and the component being worked on, then check the product page for vehicle or engine fitment, working size, drive size, reach, capacity and any tool-specific notes before ordering. Some tools match a particular TD5 component, while others are selected around the filter, fastener, seal, joint or fluid being handled.
Showing all 27 resultsSorted by popularity
Exhaust Hanger Removal Pliers – Sealey | VS1631
Original price was: £35.94.£29.40Current price is: £29.40. inc. UK VAT
Sold out
DA1117 Oil Filter Spanner – Td5
Find the right Land Rover service tool
Service tools are normally selected around the job rather than the vehicle alone. Identify the component being removed, adjusted, filled or serviced, then match the tool to the engine, filter, fastener, joint, seal or fluid system involved.
| Job | Best place to start | Check before ordering |
|---|---|---|
| TD5 timing and injector work | TD5 timing locking pins and injector removal tools | Confirm the engine, vehicle and exact operation the tool is designed to carry out |
| Engine oil and filter servicing | TD5 filter spanners and oil drain equipment | Check the filter type, available access and drain-pan capacity |
| Greasing and bearing maintenance | Grease guns and bearing grease packers | Check grease capacity, cartridge size and the component being lubricated |
| Gearbox, transfer box and differential filling | Fluid handling tools | Check the oil container size, pump connection, hose reach and access to the filler plug |
| Removing seals, studs and seized components | Extraction, pulling and metalwork tools | Match the tool size and design to the stud, seal, joint or component being removed |
| Steering and suspension work | Ball joint separators and Defender steering drop arm pullers | Check vehicle fitment, jaw or fork size and the working clearance around the joint |
| Brake and transmission brake servicing | Brake and handbrake spring tools | Check the brake or transmission brake layout and the type of spring or retaining washer fitted |
| Threads and stubborn fixings | Sockets, spanners and drive tools | Check thread size, drive size, tool length and the available working space |
Check the tool specification before ordering
The correct tool may depend on the vehicle and engine, but it can also depend on the dimensions of the component itself. Use the product title, stated measurements, drive size and fitment notes together before ordering.
Vehicle and engine
Confirm Defender, Discovery or other model fitment where the tool is made for a specific Land Rover engine or component.
Confirm Defender, Discovery or other model fitment where the tool is made for a specific Land Rover engine or component.
Working size
Check jaw opening, fork width, stud diameter, thread range, filter size or other stated working dimensions.
Check jaw opening, fork width, stud diameter, thread range, filter size or other stated working dimensions.
Drive and access
Confirm the square-drive size, tool length, reach and whether there is enough clearance around the component.
Confirm the square-drive size, tool length, reach and whether there is enough clearance around the component.
Capacity and connection
For grease and fluid tools, check container capacity, cartridge or bottle size, hose arrangement and connection method.
For grease and fluid tools, check container capacity, cartridge or bottle size, hose arrangement and connection method.
Specialist and general service tools
The category combines tools made around particular Land Rover jobs with general workshop tools selected for servicing and repair work. The product page should be used to confirm whether the tool is vehicle-specific, component-specific or suitable for broader workshop use.
| Tool type | Typical use |
|---|---|
| Vehicle or engine-specific tools | TD5 timing, injector removal, filter servicing and Defender steering work |
| Component-specific tools | Removing seals, studs, ball joints, exhaust hangers and brake retaining springs |
| Fluid and lubrication tools | Draining oil, filling gearboxes and axles, greasing bearings and lubricating service points |
| General workshop tools | Thread work, stubborn fixings, battery terminals, washer jets and small component removal |
Related workshop sections
| Section | Use it for |
|---|---|
| Workshop & Tools | The complete workshop section, including hand tools, lifting equipment, testing equipment and workshop supplies |
| Extraction, Pulling & Metalwork | Stud extractors, pullers, separators and tools for seized or damaged components |
| Fluid Handling | Equipment for draining, collecting, pumping and transferring oils and service fluids |
| Sockets, Spanners & Drive Tools | Drive tools, spanners, sockets and related equipment for dismantling and refitting components |
| Torque Wrenches | Controlled tightening of fixings after servicing, maintenance and component replacement |
