Rear Suspension Parts
Discovery 2 rear suspension parts for rear air suspension repairs, anti-roll bar and drop-link replacement, Watts linkage work, radius arm bushes, bump stops and raised-suspension setups.
Start with whether the vehicle retains rear air suspension or has coil springs, then check ACE or non-ACE fitment, standard or raised suspension height, the exact bush position and the parts included with each kit.
Showing all 32 resultsSorted by popularity
Discovery 2 Extended Anti-Roll Bar Drop Link Kit – Meyle HD 2–3″ Lift
Discovery 2 Anti-Roll Bar Drop Link Kit – Meyle HD
Original price was: £91.63.£87.05Current price is: £87.05. inc. UK VATDiscovery 2 Air Spring (Contitech OEM) RKB101200G
£142.92 inc. UK VATANR6920 | Discovery 2 Watts Linkage Centre Bolt
£13.99 inc. UK VATTF526 Rear Air Spring Spacers – Discovery 2
Original price was: £56.81.£48.00Current price is: £48.00. inc. UK VATBilstein B6 4600 Shock Absorber Kit – Discovery 2
Find the right Discovery 2 rear suspension parts
Discovery 2 rear suspension repairs split between the self-levelling air suspension system, rear axle location, anti-roll bar components and raised-suspension parts. Identify the system and component being worked on before comparing individual bushes, complete kits and supporting hardware.
| Job | Best place to start | Check before ordering |
|---|---|---|
| Replace a leaking or sagging rear air spring | Dunlop rear air spring or ProEvo+ air spring with clips and connector | Confirm rear air suspension fitment, the stated air-line connection and whether retaining clips or a Voss connector are included |
| Repair incorrect or uneven rear suspension height | RQH100030 rear ride-height sensor | Confirm that the sensor or linkage is at fault and check that the replacement includes the linkage arm and joints |
| Replace worn rear anti-roll bar links | Meyle HD rear drop link or complete front and rear drop-link kit | Check whether one rear link or all four links are being replaced and whether the vehicle is standard height or lifted |
| Replace rear anti-roll bar bushes | Match the bush to the vehicle’s coil-spring, rear air suspension and ACE arrangement | Check ACE or non-ACE fitment, rear suspension type and whether the bush fits the anti-roll bar mounting or the ACE actuator ram |
| Repair rear-end movement or a knocking Watts linkage | Watts linkage centre pivot, Terrafirma bush kit or SuperPro bush kit | Decide whether the job needs a complete centre pivot, five replacement bushes, individual bolts or a wider linkage rebuild |
| Replace rear radius arm bushes | TF1011 rear radius arm bush kit or a complete suspension poly-bush kit | Check whether only the rear radius arm bushes are required or whether front, rear and panhard rod bushes are being renewed together |
| Set up raised or extended-travel rear suspension | Discovery 2 suspension lift parts and long-travel Watts linkage arms | Check lift height, air-spring or coil-spring setup, drop-link length and whether longer Watts linkage arms require bushes separately |
Check rear suspension fitment before ordering
Discovery 2 rear suspension parts can look similar while fitting different suspension and ACE arrangements. Use the original part number, component position and product-page fitment together, particularly when ordering air-suspension fittings, anti-roll bar bushes and parts for a lifted vehicle.
Confirm whether the vehicle retains self-levelling rear air suspension or has standard or converted coil springs.
Anti-roll bar bushes and related components can differ between conventional suspension and vehicles fitted with Active Cornering Enhancement.
Standard drop links are different from extended links for 2–3-inch lifts, while long-travel Watts linkage arms are intended for raised suspension setups.
Check whether the product supplies one bush or link, a pair, all four drop links, a five-bush Watts linkage kit or a complete suspension bush kit.
OEM, branded and specialist rear suspension parts
Individual product pages identify the stated brand, quality level and kit contents. Compare the suspension system, component position, original part number and included hardware alongside the brand before ordering.
| Part group | How it is shown on Twinwoods 4x4 |
|---|---|
| OEM air springs | Dunlop and Contitech rear air springs are identified by brand, connection details and the stated parts included with each version. |
| Branded replacement parts | Meyle HD drop links and other branded components are identified by exact position, part number and whether they are supplied individually or as a kit. |
| Polyurethane bush kits | Terrafirma and SuperPro kits are identified by the suspension positions covered and whether Watts linkage bushes are included. |
| Raised-suspension parts | Extended drop links, air-spring spacers and long-travel Watts linkage arms are identified by their intended suspension height or travel. |
Related Discovery 2 suspension sections
| Section | Use it for |
|---|---|
| Discovery 2 axle and suspension parts | The wider Discovery 2 suspension, hub, axle, ACE and suspension-lift product group |
| Discovery 2 front suspension parts | Front dampers, bushes, bump stops, anti-roll bar links and suspension kits |
| Discovery 2 rear axle parts | Rear hubs, differential parts, propshaft connections and rear axle components |
| Discovery 2 ACE parts | ACE actuator rams, sensors, valve-block parts, bushes, seals and hydraulic fluid |
| Discovery 2 suspension lift kits | Complete lift kits, air-to-coil conversion parts and extended anti-roll bar drop links |






